11 4223.1500 | Siga nas redes sociais  Siga no FacebookAcompanhe no LinkedIn

Válvula Controladora de Pressão RS 659

Válvula de isolamento para fluídos perigosos
Válvula Controladora de Pressão RS 659
Válvula Controladora de Pressão RS 659

Características Técnicas

Conexão Flangeada:  DN 15 - 50
Conexão Roscada:  G 1/2 - 2
Pressão Nominal: PN 16
Range de vazão de Fechamento:  mín 15% acima do fluxo de operação
Kvs: 5 - 22 m3/h
Temperatura: 130 ºC
Fluídos: Líquidos e gases








Descrição do produto

Leaking or broken pipes or hoses may only result in flooding but can, if the escaping fluids are flammable, water-polluting or toxic, have catastrophic consequences. For this reason pipe break isolating valves are fitted on the inlet side of such systems. These valves are set to a certain flow volume and shut off reliably and without delay as soon as this flow volume is exceeded.

RS 659 is a piston-controlled spring-loaded pipe break isolating valve. The valve cone is fitted with a soft seal. When the pipeline is depressurised the valve is open. Under operating conditions the small pressure drop caused by the pipe break isolating valve acts on the piston/spring system. If the flow volume increases beyond the set value, an imbalance is introduced between the pressure acting on the piston and the force of the spring causing the cone to close. The resulting increase in the flow resistance reinforces the closing force of the piston and causes the complete shutoff of the pipe section. The closing or shutoff speed may be adjustable. Once the fault has been removed the valve can be re-opened and re-activated by pushing the button on the pilot valve. Rotating the adjusting screw clockwise increases the shutoff trigger volume. In special cases an adjustable shutoff delay may be fitted.

These valves are no shut-off elements ensuring a tight closing of the valve. In accordance with DIN EN 60534-4 and/or ANSI FCI 70-2 they may feature a leakage rate in closed position in compliance with the leakage classes V optional IV:

Leakage class IV (PTFE seal cone) = 0.01 % Kvs value

Leakage class V (soft seal cone) = 1.8 x 10-5 x Δp x D* [l/h]

*D=seat diameter

Operating instructions, know how and safety instructions must be observed. All the pressure has always been indicated as overpressure. We reserve the right to alter technical specifications without notice.


Para fazer o download do catálogo, clique aqui (em inglês).


11 4223.1500

Rua Martino de Martine, 30 - Barcelona - SCS São Paulo. CEP: 09551-060 comercial@aggerenciamento.com.br

Atendimento de Seg. a Sex., das 7h30 às 17h30. Aos Sábados das 08h às 13h